BSI Insta-Cure Thin CA Super Glue

Insta-Cure boasts a water-thin viscosity, utilising capillary action to seep deeply into joints and achieving a rapid cure within seconds. To ensure optimal bonding, surfaces must have a tight fit and be held together while applying the adhesive along the edges of the seam. It’s crucial to be aware that during the curing process, Insta-Cure releases vapours that can potentially irritate the nose and eyes, necessitating preparedness. Specifically engineered for balsa wood, the thin consistency allows for deep penetration, forming a bond that goes beyond the surface. Experience swift and dependable adhesion across various applications with Insta-Cure.

Uses

Works Best On:

• Balsa Wood
• Ceramics

Works Good On:

• Soft Wood
• Fibreglass
• Hard Plastics
• Water-Resistant
• CA Hinges

Directions

Unscrew the cap from the nozzle. For more precise applications, attach the extender tip. Insta-Cure super glue is ideal for bonding tight-fitting parts. Bring the parts together, occasionally using masking tape for additional support, then apply Insta-Cure along the joints. The adhesive will seep deep into the joints, creating a strong bond within 1–3 seconds. To remove excess cured super glue from surfaces such as ceramics, gently rub with a paper towel soaked in Un-Cure. Full strength is achieved within two hours. Before replacing the screw-on cap, ensure the nozzle is wiped clean. Shelf life can be extended by refrigerating. Once cured, the super glue remains stable within a temperature range of -40 to 104 °C. For cleaning, soak the extender tip in acetone.